Tools

Siphon pump for use with Slime super-duty tire sealant Easy installation, washes with water, non-corrosive. SLIME PUMP 5 GAL. ALUM

Removes valve core, re-tap threads and ream the inside of the valve Works on A.C. unit valves. TIREVALVE TOOL SLIME 4WAY

Sensors will work with all valve stems û However, rubber 90? valve stems do not last as long as metal and depending on the age and quality of your rubber 90? valve stem you need to make sure they are in good shape No tire rebalancing is needed and each...

Enhanced sensors offer faster and better transmitting time on pressure and temperature changes, while providing continuous transmitting when in motion Unique G-Force sensing recognizes movement allowing the sensors to save battery power when parked and...

12-sided wrench addition provides easy and quick access to 17 mm and 12 mm drain plugs Includes drain plug wrench Fits 2-1/2" oil filter Made in USA. OIL FILTER WRENCH 2 1/2"

Allows removal of oil filter without removing fairing pieces Posi-LockÖ design requires no adjustment Fits most 2-1/2" oil filters. OIL FILTER WRENCH

In use height is 130 mm while flat it is 55 mm Suitable for engine oil and radiator coolant Will flatten out and reduce in size. SILICON FOLDING FUNNEL

Crucial for properly aligning the shafts between the motor and the transmission When tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs. CLUTCH ALI TOOL POL

Crucial for properly aligning the shafts between the motor and the transmission When tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs. CLUTCH ALI TOOL ENG SHAFT

Crucial for properly aligning the shafts between the motor and the transmission When tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs. CLUTCH ALI TOOL ENG SHAFT

Crucial for properly aligning the shafts between the motor and the transmission When tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs. CLUTCH ALI TOOL TRANS

Crucial for properly aligning the shafts between the motor and the transmission When tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs. CLUTCH ALI TOOL TRANS