Tools

For 2 cycle engines and chemicals Eliminate the mistakes and guesswork of measuring fluids Allows proper premix ratios from 16:1 to 70:1 Calibrated in cubic centimeters, ounces and pints Lid makes mixing safer and easier. RATIO RITE MEASURING CUP

For 2 cycle engines and chemicals Eliminate the mistakes and guesswork of measuring fluids Allows proper premix ratios from 16:1 to 70:1 Calibrated in cubic centimeters, ounces and pints Lid makes mixing safer and easier. RATIO RITE LID

This tool is quick and easy to use and a "must have" for work on a higher volume of WP shocks Less expensive and easier to use than the factory recharging tool Works on all WP shocks that have a reservoir Clamps on to the reservoir. TOOL KTM SHOCK CHARGE

It comes with a 1/4" flare nut quick coupling to work with the Quick Connect Hose Does not require a wrench and reaches hard-to-get valve stems. TOOL, NITROGEN GAUGE

Collapsible stainless steel tube has etched measurement increments for easy, accurate fork oil level readings Same easy-to-use qualities as Race Tech« standard fork oil level tool in a durable, professional package. RT PRO FRK OIL LEVEL TOOL

Split fork seal drivers save headaches and seals Fit both inverted and conventional forks. 43MM FORK SEAL DRVR (SPLT

A must for all suspension work Holds fork damping rods, cartridges, shock shafts Unique design allows installation of dowels into the top of the vise jaws The holding tools hang on the dowels instead of dropping on the ground when the vise is opened...

Kit includes adapters for 10 mm L x 1.0 mm, 12 mm L x 1.0 mm, 12 mm L x 1.25 mm and 14 mm L x 1.0 mm damping rods Easily threads onto the damping rod to facilitate cartridge fork bleeding when changing fork oil Baffled to eliminate the mess normally...

The Quick Connect Nitrogen Hose has special 800 psi (EU: 55,16 Bar) "finger tight" 1/4" (EU: 0,64 cm) flare nut quick couplings This simple assembly works perfectly with our Nitrogen Regulator and Gauge. TOOL, NITROGEN HOSE

A must for all suspension work Holds fork damping rods, cartridges, shock shafts Unique design allows installation of dowels into the top of the vise jaws The holding tools hang on the dowels instead of dropping on the ground when the vise is opened...

A must for all suspension work Holds fork damping rods, cartridges, shock shafts Unique design allows installation of dowels into the top of the vise jaws The holding tools hang on the dowels instead of dropping on the ground when the vise is opened...

With a tap of a hammer, the taper wedges into the ID of most Damping Rods, late model and vintage Designed to make spinning damper rods easier to remove. DAMPING ROD HOLDING TOOL