Tools

With a tap of a hammer, the taper wedges into the ID of most Damping Rods, late model and vintage Designed to make spinning damper rods easier to remove. DAMPING ROD HOLDING TOOL

Allows easy removal and installation of shock seal assemblies. TSSS-02 SHOCK SEAL TOOL

Allows easy removal and installation of shock seal assemblies. SHOCK SEAL HEAD SET TOOL

Designed to remove and install the seal head assembly from the inner fork tube It allows changing fork springs without disassembling the valving stack It is reversible and has two hex sizes for the two sizes of forks For Showa BPF forks. CARTRIDGE...

Offers users a better way to turn the clickers and remove the compression adjuster during assembly Allows removal of the fork compression adjusters. FORK COMPRESSION TOOL

Unique design works on multiple sizes of fork caps. FORK CAP WRENCH 46/50MM

Four sizes (17 mm, 19 mm, 22 mm and 24 mm) Fits many sport and dirt bikes. TOOL HEX AXLE

Removes the Compression Needle from the shock body on early KTM WP PDS shocks Required to install a SWCN 10 Telescopic Needle (15.0 pin spacing x 2.4mm pins). TOOL,PIN WP PDS

Screws onto the Schrader valve for easy removal. BLADDER CAP REMOVAL TOOL

Gets behind round wire clips without marring shock bodies Makes removing shock retaining clips a cinch. TOOL, RETAINING CLIP

The punch marks at the threads must be drilled 1 mm deep prior to removal For removal of 24 mm rear shock compression adjusters. SHK COMP ADJ SOCKET 24MM

Adapts shocks with self-sealing rubber valves for use with Race Tech nitrogen gauge. RT SHCK NITROGEN NEEDLE