Tools

Split fork seal drivers save headaches and seals Fit both inverted and conventional forks. 43MM FORK SEAL DRVR (SPLT

Split fork seal drivers save headaches and seals Fit both inverted and conventional forks. 41/40MM FORK SEAL DRVR

Split fork seal drivers save headaches and seals Fit both inverted and conventional forks. 39/38MM FORK SEAL DRIVE

Split fork seal drivers save headaches and seals Fit both inverted and conventional forks. 37/36MM FORK SEAL DRIVE

Shaft features two locator washers that allow the tool to rest inside the shock body and not get skewed while tightening or loosening the compression metering pin Driven with a T-handle, holds the Needle, and is self-centering in the body with a pin...

Designed to be used with shocks and forks that have holes for unscrewing Unique "back cut" that keeps the pins from slipping out Pins are replaceable. TOOL, PIN SPANNER 5-5.5MM

Designed to be used with shocks and forks that have holes for unscrewing Unique "back cut" that keeps the pins from slipping out Pins are replaceable. TOOL, PIN SPANNER 4-4.5MM

Holds fork cartridges for disassembly and assembly. FORK HOLDING TOOL

A must for all suspension work Holds fork damping rods, cartridges, shock shafts Unique design allows installation of dowels into the top of the vise jaws The holding tools hang on the dowels instead of dropping on the ground when the vise is opened...

Kit includes adapters for 10 mm L x 1.0 mm, 12 mm L x 1.0 mm, 12 mm L x 1.25 mm and 14 mm L x 1.0 mm damping rods Easily threads onto the damping rod to facilitate cartridge fork bleeding when changing fork oil Baffled to eliminate the mess normally...

Prevents damage to shock spring collars when pre-load is adjusted Bent and rounded tip fits into tight places and minimizes damage. SHOCK PRELOAD ADJ TOOL

The Quick Connect Nitrogen Hose has special 800 psi (EU: 55,16 Bar) "finger tight" 1/4" (EU: 0,64 cm) flare nut quick couplings This simple assembly works perfectly with our Nitrogen Regulator and Gauge. TOOL, NITROGEN HOSE