Tools
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Motion Pro Spinner Ii T-Handle With Swivel Drive 80562
MOTION PRO
MSRP: $44.75$38.91Bearing mounted spinner provides faster and easier removal and installation of bolts and nuts Unique two-step drive head offers swivel (rocker) or fixed drive Padded grip handle. TOOL SPINNER-SWIVEL-2 3/8MSRP: $44.75$38.91 -
Motion Pro Swingarm Rising Rate Linkage Bearing Install Tool 80213
MOTION PRO
MSRP: $44.75$38.91Designed for installation of the swingarm bearings on late-model Japanese off-road motorcycles Kit includes driver sizes I.D. 20 mm / O.D 26 mm, I.D. 21 mm / O.D. 26 mm and I.D. 22 mm / O.D. 27 mm Includes three drivers for use with common bearing sizes...MSRP: $44.75$38.91 -
Motion Pro Clutch Holding Tool 80008
MOTION PRO
MSRP: $44.75$38.91Will not work on clutch baskets with reversed inner clutch hubs where the integrated clutch faceplate is facing outward Not recommended for V-groove or half-round-style clutch hubs Holds clutch hubs, flywheels, gears, sprockets, etc. Features 8 mm...MSRP: $44.75$38.91 -
Motion Pro Forktru Fork Alignment Tool 80412
MOTION PRO
MSRP: $44.75$38.91Will work on 27 mm-62 mm fork legs and tubes and on forks that are 140 mm to 220 mm (5.5" - 8.6") on center Quick and easy-to-use tool for aligning front forks to ensure they are parallel from top to bottom Proper alignment reduces stiction, enhancing...MSRP: $44.75$38.91 -
Motion Pro Brake Caliper Piston Tool 80591
MOTION PRO
MSRP: $43.80$38.08Ultra-low-profile design removes pistons from monoblock disc brake calipers Fits pistons with a center bore size of 14 mm - 28 mm Non-marring design will not harm pistons or caliper Works on aluminum, steel and titanium pistons Easy-to-use single locking...MSRP: $43.80$38.08 -
Motion Pro T-Handle Bit Driver With Bits 80557
MOTION PRO
MSRP: $42.85$37.26Includes Japanese Industrial Standard (JIS) cross-head bits #1, #2, and #3; also accepts all common driver bits Features 3 drive heads, one at end of shaft and 2 at each end of handle with magnets to hold drivers firmly in place High quality Motion Pro«...MSRP: $42.85$37.26 -
Motion Pro Shock Bearing Puller 80689
MOTION PRO
MSRP: $42.85$37.26Safely removes and installs the upper spherical bearing on rear shocks Reversible puller cup with cutaway fits a wide variety of shock reservoir and compression adjuster configurations Fits 24 mm OD bearings Durable brass thrust washer. TOOL SHOCK...MSRP: $42.85$37.26 -
Motion Pro Flywheel Puller Internal Thread With Protector 80686
MOTION PRO
MSRP: $42.85$37.26Used for removal of the flywheel or rotor if applicable Laser etched with Motion Pro logo and part number Heat treated for strength and durability Durable hot black oxide finish Comes with protector Right hand thread Lifetime limited warranty. TOOL...MSRP: $42.85$37.26 -
Motion Pro Spinner Ii T-Handle With Swivel Drive 80563
MOTION PRO
MSRP: $41.90$36.43Bearing mounted spinner provides faster and easier removal and installation of bolts and nuts Unique two-step drive head offers swivel (rocker) or fixed drive Padded grip handle. TOOL T-HAND SPINNER-2 1/4MSRP: $41.90$36.43 -
Motion Pro Metric Socket T-Handle Set 80145
MOTION PRO
MSRP: $41.90$36.43Hex socket extends only part of the way into the socket to allow the nut to be held flush with the end for easier, hands-free starting Deep sockets allow nuts to be driven over long threaded bolts Slim outside diameter allows sockets to fit in tight...MSRP: $41.90$36.43 -
Motion Pro T-6 Combo Lever Adapter 80327
MOTION PRO
MSRP: $41.90$36.433/8" (EU: 0,95 cm) drive male and 1/4" (EU: 0,64 cm) drive female for use with sockets for smaller front axles 3/8" (EU: 0,95 cm) square drive is rated for a maximum torque of 90 lb/ft (EU: 122,02 NM) Allows T-6 Combo LeverÖ to be used as a 3/8" (EU:...MSRP: $41.90$36.43 -
Motion Pro T-6 Combo Lever Adapter 80326
MOTION PRO
MSRP: $41.90$36.433/8" (EU: 0,95 cm) drive male and 1/4" (EU: 0,64 cm) drive female for use with sockets for smaller front axles 3/8" (EU: 0,95 cm) square drive is rated for a maximum torque of 90 lb/ft (EU: 122,02 NM) Allows T-6 Combo LeverÖ to be used as a 3/8" (EU:...MSRP: $41.90$36.43