Tools

Comfortable, reversible, ratcheting, with an ergonomic rubber grip that will not scratch Low profile to allow clearance between frame and engine Comes with a replaceable 3/16" Allen bit end To install and remove rocker box covers Long handle for...

Includes 7 SAE coarse dies (sizes: 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12 and 5/8"-11), 7 SAE fine dies (sizes: 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18 and 5/8"-18), 6 SAE coarse taps (sizes: 1/4"-20, 5/16"-18, 3/8"-16,...

Used for rotation of the crankshaft/check engine timing and parts clearance on Sportster« motorcycles EZ Grip screwdriver-style handle for comfort and more turning power Offset design so it will not interfere with the motor case 1-1/8" drive. WRENCH...

Diameter of the bolt is turned slightly smaller than the actual crankshaft diameter, allowing the inner bearing races to be installed and removed without pressing them on or off Allows much faster changing of shims and faster setup time For Big Twin...

Improved design and triple prong engagement allows for precise neck bearing adjustment Used to adjust the preload of the neck bearing on Springer forks This is the only tool on the market to do this particular task 1" diameter socket, 3/8" square drive...

Ten punch sizes: 1/4", 5/16", 1/4", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" Designed to cut holes and internal radii in gaskets and other soft material Contains 11 pieces, 10 punches and one long driving mandrel Made in the U.S.A.. GASKET...

Contains 7 metric rethread taps; sizes: M6-1.00, M8-1.25, M-10-1.25, M10-1.50, M12-1.25, M12-1.50 and M12-1.75 Also has 1 metric restorer file in 8 sizes: 0.75", 1.00", 1.25", 1.50", 1.75", 2.00", 2.50" and 3.00" For repair of damaged external threads on...

Features reversible ratcheting action and an 1/4" ball-end Allen bit end for flexibility in tight areas To install and remove intake manifold socket-head cap screws Vinyl handle with ergonomic grip for comfort Made in the U.S.A.. WRENCH INT. MANIFOLD HD

Set consists of one 15? off-set wrench, one 15? reverse off-set wrench, one flat wrench, and four bits (sizes #1 and #2 Phillips, 1/4" and 9/32" slotted) Made in the U.S.A.. WRENCHES FINE TOOTH 7PC

Simply install die onto the damaged or dirty threads, and use a standard wrench to work the die back and forth until the threads are repaired and cleaned Kit includes a set of seven dies (M14-1.50, M16-1.50, M18-1.50, M20-1.60, M24-1.50, 3/4"-16 and...

Extra long rocker box wrench with T40 bit used to remove/replace the bolt that holds the rear fender to the frame on H-D touring models Removes the rear fender bolt without having to remove the tire Made in the U.S.A.. WRENCH REAR FENDER FL

Use with deep well sockets, or 3/8" square drive ratchet Set of 5 includes one of each single-end thread chasers: M10 x 1.0 M12 x 1.25 M14 x 1.25 M18 x 1.5 M20 x 1.5. TOOL THREAD CHASER TAP 5PC. SET