{"title":"ALPINESTARS","description":"\u003cp\u003eShop all Alpinestars motorcycle gear including boots, gloves, jackets, suits, and protection. The world leader in performance motorsport apparel.\u003c\/p\u003e","products":[{"product_id":"alpinestars-supertech-m8-helmet-factory-blue-orange-yellow-2xl-8302922-7445-2x","title":"ALPINESTARS Supertech M8 Helmet - Factory - Blue\/Orange\/Yellow - 2XL 8302922-7445-2X","description":"\u003cp\u003eSupertech M8 Helmet - Factory - Blue\/Orange\/Yellow - 2XL\n\u003cbr\u003eShell construction utilizes a highly advanced molding technology with a multi-composite combination: uni-directional carbon composite with aramid layer that gives significant radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and providing critical penetration protection, This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner, The Supertech M8 liner construction combines with the shell to offer highly efficient impact energy management, Formed with a multi-density EPS polymer, the energy absorbing layer gives an inner helmet profile which soaks up forces dissipated over the outer shell at the point of an impact and provides a shape offering a close and comfortable fit, Four section liner construction allows for specific densities of polymer to be prepared for different zones around the helmet lining improving energy performance, comfort and fit, A-Head fitting height and angle adjustment system, Incorporates a system to allow the helmet to be tuned exactly to the rider’s preference for the height and angle at which the helmet sits on the head allowing for ultra-specific set-up that can be adapted for the type of riding and the rider’s preference, Raise and lower helmet fit and tilt with micro-adjustable pad, Visor release system ensuring the mounting is held securely in place for riding over extreme terrain and any track conditions, Visor release system provides the right level of resistance to ensure the visor detaches from the helmet shell if it is subjected to a significant impact regardless of angle, The Supertech M8 visor release mechanism is conceived to avoid the inherent weaknesses in other types of anchoring systems, Maintaining shell integrity is vital for safety and with the possibility of multi-directional forces impacting on the visor, separation at the critical point of leading reduces potentially damaging leverage and rotational accelerations that refer injury to the rider’s neck and spine, The base of the Supertech M8 helmet has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (clavicle), Energy absorption pad incorporated into the area of the base pad where it sits over the rider’s collarbone, Energy absorption pad consists of a more flexible compound rubber section which allows deflection when it contacts the clavicle, Polypropylene chinbar allows for a degree of lateral deflection, further improving impact protection for the collarbones, Multi-Directional Impact Protection System (MIPS®) incorporated to reduce rotational motion energies that impact the helmet causing damaging gyration force to be transmitted to the brain, A low friction ‘slip’ layer is incorporated into the Supertech M8 helmet, between the comfort padding layer and the multi-density polymer energy absorption shell. When energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorption layer to damp and re-direct the energy before causing significant acceleration stress to the brain. This mitigates the causes of brain injuries, such as concussion, Emergency Release System (ERS), While the helmet is still on the rider’s head, the side cheek padding can be extracted efficiently and safely to allow ease of removal by trackside support and medical staff, The Supertech M8 is also designed to allow a helmet ‘Eject’ inflation system to be fitted into the inside crown of the shell, Along with the ERS padding removal, ‘Eject’ allows for emergency removal of the helmet, without putting load on the rider’s spine, Chin-strap: Wider than certification requirement: 26 mm for comfort and produced with a woven poly yarn to give a soft ‘hand’ feel that connects securely with a double D-ring, The material selection, preparation and construction of the helmet has been rigorously analyzed for weight to strength and energy absorption properties and a strict analysis of all the components used in the Supertech M8 finishing\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844558659824,"sku":"01107402","price":292.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2176752.png?v=1781546301"},{"product_id":"alpinestars-supertech-m10-helmet-solid-mips®-gloss-white-small-8300323-2180-s","title":"ALPINESTARS Supertech M10 Helmet - Solid - MIPS® - Gloss White - Small 8300323-2180-S","description":"\u003cp\u003eSupertech M10 Helmet - Solid - MIPS® - Gloss White - Small\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844558856432,"sku":"01108578","price":749.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2905144.png?v=1781546306"},{"product_id":"alpinestars-supertech-m10-helmet-aeon-mips®-gloss-bright-red-blue-medium-8301923-3017-m","title":"ALPINESTARS Supertech M10 Helmet - Aeon - MIPS® - Gloss Bright Red\/Blue - Medium 8301923-3017-M","description":"\u003cp\u003eSupertech M10 Helmet - Aeon - MIPS® - Gloss Bright Red\/Blue - Medium\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844558987504,"sku":"01108609","price":719.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890466.png?v=1781546310"},{"product_id":"alpinestars-supertech-m10-helmet-solid-mips®-gloss-black-carbon-xs-8300323-1188-xs","title":"ALPINESTARS Supertech M10 Helmet - Solid - MIPS® - Gloss Black Carbon - XS 8300323-1188-XS","description":"\u003cp\u003eSupertech M10 Helmet - Solid - MIPS® - Gloss Black Carbon - XS\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844559249648,"sku":"01108570","price":749.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890401.png?v=1781546315"},{"product_id":"alpinestars-supertech-m10-helmet-flood-mips®-black-dark-gray-medium-8301023-1310-m","title":"ALPINESTARS Supertech M10 Helmet - Flood - MIPS® - Black\/Dark Gray - Medium 8301023-1310-M","description":"\u003cp\u003eSupertech M10 Helmet - Flood - MIPS® - Black\/Dark Gray - Medium\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844559872240,"sku":"01108585","price":839.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890404.png?v=1781546319"},{"product_id":"alpinestars-supertech-m10-helmet-flood-mips®-red-fluo-red-small-8301023-3003-s","title":"ALPINESTARS Supertech M10 Helmet - Flood - MIPS® - Red Fluo\/Red - Small 8301023-3003-S","description":"\u003cp\u003eSupertech M10 Helmet - Flood - MIPS® - Red Fluo\/Red - Small\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844560068848,"sku":"01108590","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890424.png?v=1781546324"},{"product_id":"alpinestars-supertech-m10-helmet-fame-mips®-black-carbon-medium-8300423-1902-m","title":"ALPINESTARS Supertech M10 Helmet - Fame - MIPS® - Black Carbon - Medium 8300423-1902-M","description":"\u003cp\u003eSupertech M10 Helmet - Fame - MIPS® - Black Carbon - Medium\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844560330992,"sku":"01108597","price":839.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890435.png?v=1781546328"},{"product_id":"alpinestars-supertech-m10-helmet-aeon-mips®-gloss-bright-red-blue-large-8301923-3017-l","title":"ALPINESTARS Supertech M10 Helmet - Aeon - MIPS® - Gloss Bright Red\/Blue - Large 8301923-3017-L","description":"\u003cp\u003eSupertech M10 Helmet - Aeon - MIPS® - Gloss Bright Red\/Blue - Large\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844560625904,"sku":"01108610","price":719.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890468.png?v=1781546333"},{"product_id":"alpinestars-supertech-m10-helmet-aeon-mips®-gloss-bright-red-blue-xl-8301923-3017-xl","title":"ALPINESTARS Supertech M10 Helmet - Aeon - MIPS® - Gloss Bright Red\/Blue - XL 8301923-3017-XL","description":"\u003cp\u003eSupertech M10 Helmet - Aeon - MIPS® - Gloss Bright Red\/Blue - XL\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844560822512,"sku":"01108611","price":719.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890471.png?v=1781546338"},{"product_id":"alpinestars-supertech-m10-helmet-ampress-mips®-matte-black-white-xs-8300823-1121-xs","title":"ALPINESTARS Supertech M10 Helmet - Ampress - MIPS® - Matte Black\/White - XS 8300823-1121-XS","description":"\u003cp\u003eSupertech M10 Helmet - Ampress - MIPS® - Matte Black\/White - XS\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844561740016,"sku":"01108613","price":719.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890475.png?v=1781546343"},{"product_id":"alpinestars-supertech-m10-helmet-ampress-mips®-matte-black-white-medium-8300823-1121-m","title":"ALPINESTARS Supertech M10 Helmet - Ampress - MIPS® - Matte Black\/White - Medium 8300823-1121-M","description":"\u003cp\u003eSupertech M10 Helmet - Ampress - MIPS® - Matte Black\/White - Medium\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844561936624,"sku":"01108615","price":719.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890477.png?v=1781546348"},{"product_id":"alpinestars-supertech-m10-helmet-ampress-mips®-matte-black-white-xl-8300823-1121-xl","title":"ALPINESTARS Supertech M10 Helmet - Ampress - MIPS® - Matte Black\/White - XL 8300823-1121-XL","description":"\u003cp\u003eSupertech M10 Helmet - Ampress - MIPS® - Matte Black\/White - XL\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844562133232,"sku":"01108617","price":719.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890482.png?v=1781546353"},{"product_id":"alpinestars-supertech-m10-helmet-ampress-mips®-gloss-black-yellow-small-8300823-1414-s","title":"ALPINESTARS Supertech M10 Helmet - Ampress - MIPS® - Gloss Black\/Yellow - Small 8300823-1414-S","description":"\u003cp\u003eSupertech M10 Helmet - Ampress - MIPS® - Gloss Black\/Yellow - Small\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844562985200,"sku":"01108620","price":719.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890487.png?v=1781546357"},{"product_id":"alpinestars-supertech-m10-helmet-ampress-mips®-gloss-black-yellow-2xl-8300823-1414-2x","title":"ALPINESTARS Supertech M10 Helmet - Ampress - MIPS® - Gloss Black\/Yellow - 2XL 8300823-1414-2X","description":"\u003cp\u003eSupertech M10 Helmet - Ampress - MIPS® - Gloss Black\/Yellow - 2XL\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844563149040,"sku":"01108624","price":719.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/2890507.png?v=1781546362"},{"product_id":"alpinestars-supertech-m10-helmet-flood-mips®-gloss-silver-black-orange-fluo-xs-8301023-1954-xs","title":"ALPINESTARS Supertech M10 Helmet - Flood - MIPS® - Gloss Silver\/Black\/Orange Fluo - XS 8301023-1954-XS","description":"\u003cp\u003eSupertech M10 Helmet - Flood - MIPS® - Gloss Silver\/Black\/Orange Fluo - XS\n\u003cbr\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction, The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation, The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection, Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner, Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury, MIPS® Multi-directional Impact Protection System, Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun, Eject helmet removal system\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844563935472,"sku":"01108662","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036382.png?v=1781546366"},{"product_id":"alpinestars-supertech-m10-helmet-flood-mips®-gloss-silver-black-orange-fluo-medium-8301023-1954-m","title":"ALPINESTARS Supertech M10 Helmet - Flood - MIPS® - Gloss Silver\/Black\/Orange Fluo - Medium 8301023-1954-M","description":"\u003cp\u003eSupertech M10 Helmet - Flood - MIPS® - Gloss Silver\/Black\/Orange Fluo - Medium\n\u003cbr\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction, The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation, The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection, Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner, Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury, MIPS® Multi-directional Impact Protection System, Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun, Eject helmet removal system\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844564197616,"sku":"01108664","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036388.png?v=1781546371"},{"product_id":"alpinestars-supertech-m10-helmet-flood-mips®-gloss-silver-black-orange-fluo-large-8301023-1954-l","title":"ALPINESTARS Supertech M10 Helmet - Flood - MIPS® - Gloss Silver\/Black\/Orange Fluo - Large 8301023-1954-L","description":"\u003cp\u003eSupertech M10 Helmet - Flood - MIPS® - Gloss Silver\/Black\/Orange Fluo - Large\n\u003cbr\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction, The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation, The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection, Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner, Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury, MIPS® Multi-directional Impact Protection System, Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun, Eject helmet removal system\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844564558064,"sku":"01108665","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036409.png?v=1781546376"},{"product_id":"alpinestars-supertech-m10-helmet-flood-mips®-gloss-silver-black-orange-fluo-xl-8301023-1954-xl","title":"ALPINESTARS Supertech M10 Helmet - Flood - MIPS® - Gloss Silver\/Black\/Orange Fluo - XL 8301023-1954-XL","description":"\u003cp\u003eSupertech M10 Helmet - Flood - MIPS® - Gloss Silver\/Black\/Orange Fluo - XL\n\u003cbr\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction, The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation, The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection, Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner, Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury, MIPS® Multi-directional Impact Protection System, Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun, Eject helmet removal system\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844564852976,"sku":"01108666","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036411.png?v=1781546381"},{"product_id":"alpinestars-youth-sm3-helmet-solid-matte-black-medium-8302225-110-ym","title":"ALPINESTARS Youth SM3 Helmet - Solid - Matte Black - Medium 8302225-110-YM","description":"\u003cp\u003eYouth SM3 Helmet - Solid - Matte Black - Medium\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844565082352,"sku":"01111630","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036259.png?v=1781546385"},{"product_id":"alpinestars-youth-sm3-helmet-wurx-gloss-black-yellow-fluo-blue-red-large-8302025-1574-yl","title":"ALPINESTARS Youth SM3 Helmet - Wurx - Gloss Black\/Yellow Fluo\/Blue\/Red Large 8302025-1574-YL","description":"\u003cp\u003eYouth SM3 Helmet - Wurx - Gloss Black\/Yellow Fluo\/Blue\/Red Large\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844565278960,"sku":"01111637","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036159.png?v=1781546389"},{"product_id":"alpinestars-youth-sm3-helmet-radium-gloss-yellow-fluo-black-blue-small-8301825-5017-ys","title":"ALPINESTARS Youth SM3 Helmet - Radium - Gloss Yellow Fluo\/Black\/Blue - Small 8301825-5017-YS","description":"\u003cp\u003eYouth SM3 Helmet - Radium - Gloss Yellow Fluo\/Black\/Blue - Small\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844565508336,"sku":"01111638","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036158.png?v=1781546394"},{"product_id":"alpinestars-youth-sm3-helmet-radium-matte-gray-black-yellow-fluo-small-8301825-9510-ys","title":"ALPINESTARS Youth SM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Small 8301825-9510-YS","description":"\u003cp\u003eYouth SM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Small\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844565901552,"sku":"01111641","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036168.png?v=1781546399"},{"product_id":"alpinestars-youth-sm3-helmet-radium-matte-gray-black-yellow-fluo-medium-8301825-9510-ym","title":"ALPINESTARS Youth SM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Medium 8301825-9510-YM","description":"\u003cp\u003eYouth SM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Medium\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844566032624,"sku":"01111642","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036167.png?v=1781546407"},{"product_id":"alpinestars-youth-sm3-helmet-fray-gloss-black-orange-yellow-fluo-small-8301625-1455-ys","title":"ALPINESTARS Youth SM3 Helmet - Fray - Gloss Black\/Orange\/Yellow Fluo - Small 8301625-1455-YS","description":"\u003cp\u003eYouth SM3 Helmet - Fray - Gloss Black\/Orange\/Yellow Fluo - Small\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844566360304,"sku":"01111644","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036438.png?v=1781546409"},{"product_id":"alpinestars-youth-sm3-helmet-fray-gloss-red-yellow-fluo-black-large-8301625-3051-yl","title":"ALPINESTARS Youth SM3 Helmet - Fray - Gloss Red\/Yellow Fluo\/Black - Large 8301625-3051-YL","description":"\u003cp\u003eYouth SM3 Helmet - Fray - Gloss Red\/Yellow Fluo\/Black - Large\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844567834864,"sku":"01111649","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/4036181.png?v=1781546492"},{"product_id":"alpinestars-sm3-helmet-solid-gloss-white-2xl-8300326-2180-xxl","title":"ALPINESTARS SM3 Helmet - Solid - Gloss White - 2XL 8300326-2180-XXL","description":"\u003cp\u003eSM3 Helmet - Solid - Gloss White - 2XL\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844568621296,"sku":"01108988","price":229.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5487590.png?v=1781546419"},{"product_id":"alpinestars-supertech-m10-helmet-jett-lawrence-r01-mips®-medium-8303325-3144-m","title":"ALPINESTARS Supertech M10 Helmet - Jett Lawrence R01 - MIPS® - Medium 8303325-3144-M","description":"\u003cp\u003eSupertech M10 Helmet - Jett Lawrence R01 - MIPS® - Medium\n\u003cbr\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction, The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation, The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection, Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner, Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury, MIPS® Multi-directional Impact Protection System, Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun, Eject helmet removal system\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844569211120,"sku":"01108992","price":919.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5574052.png?v=1781546423"},{"product_id":"alpinestars-supertech-m10-helmet-jett-lawrence-r01-mips®-xl-8303325-3144-xl","title":"ALPINESTARS Supertech M10 Helmet - Jett Lawrence R01 - MIPS® - XL 8303325-3144-XL","description":"\u003cp\u003eSupertech M10 Helmet - Jett Lawrence R01 - MIPS® - XL\n\u003cbr\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction, The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation, The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection, Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner, Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury, MIPS® Multi-directional Impact Protection System, Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun, Eject helmet removal system\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844570226928,"sku":"01108994","price":919.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5574053.png?v=1781546428"},{"product_id":"alpinestars-sm3-helmet-radium-gloss-black-white-gray-medium-8300826-1546-m","title":"ALPINESTARS SM3 Helmet - Radium - Gloss Black\/White\/Gray - Medium 8300826-1546-M","description":"\u003cp\u003eSM3 Helmet - Radium - Gloss Black\/White\/Gray - Medium\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844571472112,"sku":"01108998","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572317.png?v=1781546435"},{"product_id":"alpinestars-sm3-helmet-radium-matte-gray-black-yellow-fluo-medium-8300826-9510-m","title":"ALPINESTARS SM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Medium 8300826-9510-M","description":"\u003cp\u003eSM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Medium\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844571668720,"sku":"01109010","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572398.png?v=1781546440"},{"product_id":"alpinestars-sm3-helmet-heat-matte-silver-blue-black-small-8301026-1949-s","title":"ALPINESTARS SM3 Helmet - Heat - Matte Silver\/Blue\/Black - Small 8301026-1949-S","description":"\u003cp\u003eSM3 Helmet - Heat - Matte Silver\/Blue\/Black - Small\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844572291312,"sku":"01109016","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488113.png?v=1781546446"},{"product_id":"alpinestars-sm3-helmet-heat-matte-silver-blue-black-medium-8301026-1949-m","title":"ALPINESTARS SM3 Helmet - Heat - Matte Silver\/Blue\/Black - Medium 8301026-1949-M","description":"\u003cp\u003eSM3 Helmet - Heat - Matte Silver\/Blue\/Black - Medium\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844572586224,"sku":"01109017","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488246.png?v=1781546452"},{"product_id":"alpinestars-sm3-helmet-heat-matte-silver-blue-black-large-8301026-1949-l","title":"ALPINESTARS SM3 Helmet - Heat - Matte Silver\/Blue\/Black - Large 8301026-1949-L","description":"\u003cp\u003eSM3 Helmet - Heat - Matte Silver\/Blue\/Black - Large\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844573044976,"sku":"01109018","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488251.png?v=1781546458"},{"product_id":"alpinestars-sm3-helmet-heat-matte-silver-blue-black-xl-8301026-1949-xl","title":"ALPINESTARS SM3 Helmet - Heat - Matte Silver\/Blue\/Black - XL 8301026-1949-XL","description":"\u003cp\u003eSM3 Helmet - Heat - Matte Silver\/Blue\/Black - XL\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844573569264,"sku":"01109019","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488105.png?v=1781546463"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-white-purple-pink-2xl-8301026-2052-xxl","title":"ALPINESTARS SM3 Helmet - Heat - Gloss White\/Purple\/Pink - 2XL 8301026-2052-XXL","description":"\u003cp\u003eSM3 Helmet - Heat - Gloss White\/Purple\/Pink - 2XL\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844575699184,"sku":"01109026","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488133.png?v=1781546469"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-red-white-black-xs-8301026-3126-xs","title":"ALPINESTARS SM3 Helmet - Heat - Gloss Red\/White\/Black - XS 8301026-3126-XS","description":"\u003cp\u003eSM3 Helmet - Heat - Gloss Red\/White\/Black - XS\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844576878832,"sku":"01109027","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488310.png?v=1781546474"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-red-white-black-small-8301026-3126-s","title":"ALPINESTARS SM3 Helmet - Heat - Gloss Red\/White\/Black - Small 8301026-3126-S","description":"\u003cp\u003eSM3 Helmet - Heat - Gloss Red\/White\/Black - Small\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844577960176,"sku":"01109028","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488135.png?v=1781546480"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-red-white-black-large-8301026-3126-l","title":"ALPINESTARS SM3 Helmet - Heat - Gloss Red\/White\/Black - Large 8301026-3126-L","description":"\u003cp\u003eSM3 Helmet - Heat - Gloss Red\/White\/Black - Large\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844578124016,"sku":"01109030","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488139.png?v=1781546484"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-yellow-fluo-black-small-8301026-5011-s","title":"ALPINESTARS SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - Small 8301026-5011-S","description":"\u003cp\u003eSM3 Helmet - Heat - Gloss Yellow Fluo\/Black - Small\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844578386160,"sku":"01109034","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488214.png?v=1781546489"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-yellow-fluo-black-large-8301026-5011-l","title":"ALPINESTARS SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - Large 8301026-5011-L","description":"\u003cp\u003eSM3 Helmet - Heat - Gloss Yellow Fluo\/Black - Large\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844578648304,"sku":"01109036","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488215.png?v=1781546495"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-yellow-fluo-black-xl-8301026-5011-xl","title":"ALPINESTARS SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - XL 8301026-5011-XL","description":"\u003cp\u003eSM3 Helmet - Heat - Gloss Yellow Fluo\/Black - XL\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844579336432,"sku":"01109037","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5488216.png?v=1781546500"},{"product_id":"alpinestars-supertech-m10-helmet-flood-mips®-blue-black-carbon-medium-8301023-7282-m","title":"ALPINESTARS Supertech M10 Helmet - Flood - MIPS® - Blue\/Black Carbon - Medium 8301023-7282-M","description":"\u003cp\u003eSupertech M10 Helmet - Flood - MIPS® - Blue\/Black Carbon - Medium\n\u003cbr\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction, The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation, The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection, Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner, Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury, MIPS® Multi-directional Impact Protection System, Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun, Eject helmet removal system\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844579926256,"sku":"01109245","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572444.png?v=1781546506"},{"product_id":"alpinestars-supertech-m10-helmet-flood-mips®-blue-black-carbon-xl-8301023-7282-xl","title":"ALPINESTARS Supertech M10 Helmet - Flood - MIPS® - Blue\/Black Carbon - XL 8301023-7282-XL","description":"\u003cp\u003eSupertech M10 Helmet - Flood - MIPS® - Blue\/Black Carbon - XL\n\u003cbr\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction, The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation, The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection, Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner, Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury, MIPS® Multi-directional Impact Protection System, Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun, Eject helmet removal system\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844580221168,"sku":"01109247","price":839.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572456.png?v=1781546512"},{"product_id":"alpinestars-supertech-m10-helmet-mips®-era-gloss-pink-violet-yellow-fluo-medium-8301223-3145-m","title":"ALPINESTARS Supertech M10 Helmet - MIPS® - Era - Gloss Pink\/Violet\/Yellow Fluo - Medium 8301223-3145-M","description":"\u003cp\u003eSupertech M10 Helmet - MIPS® - Era - Gloss Pink\/Violet\/Yellow Fluo - Medium\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Equipped with MIPS® Multi-directional Impact Protection System, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844580581616,"sku":"01109251","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572483.png?v=1781546517"},{"product_id":"alpinestars-supertech-m10-helmet-mips®-era-gloss-pink-violet-yellow-fluo-large-8301223-3145-l","title":"ALPINESTARS Supertech M10 Helmet - MIPS® - Era - Gloss Pink\/Violet\/Yellow Fluo - Large 8301223-3145-L","description":"\u003cp\u003eSupertech M10 Helmet - MIPS® - Era - Gloss Pink\/Violet\/Yellow Fluo - Large\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Equipped with MIPS® Multi-directional Impact Protection System, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844581105904,"sku":"01109252","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572484.png?v=1781546523"},{"product_id":"alpinestars-supertech-m10-helmet-mips®-era-gloss-blue-red-yellow-fluo-medium-8301223-7356-m","title":"ALPINESTARS Supertech M10 Helmet - MIPS® - Era - Gloss Blue\/Red\/Yellow Fluo - Medium 8301223-7356-M","description":"\u003cp\u003eSupertech M10 Helmet - MIPS® - Era - Gloss Blue\/Red\/Yellow Fluo - Medium\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Equipped with MIPS® Multi-directional Impact Protection System, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844581400816,"sku":"01109257","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572526.png?v=1781546528"},{"product_id":"alpinestars-supertech-m10-helmet-mips®-era-gloss-blue-red-yellow-fluo-xl-8301223-7356-xl","title":"ALPINESTARS Supertech M10 Helmet - MIPS® - Era - Gloss Blue\/Red\/Yellow Fluo - XL 8301223-7356-XL","description":"\u003cp\u003eSupertech M10 Helmet - MIPS® - Era - Gloss Blue\/Red\/Yellow Fluo - XL\n\u003cbr\u003eThe S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column, The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact, Equipped with MIPS® Multi-directional Impact Protection System, Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone, Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury, A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head, Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, Eject technology includes the eject helmet removal system, Rotational acceleration and oblique impact performance, Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy, Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844581662960,"sku":"01109259","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572541.png?v=1781546534"},{"product_id":"alpinestars-sm7-helmet-core-gloss-red-small-8301826-3127-s","title":"ALPINESTARS SM7 Helmet - Core - Gloss Red - Small 8301826-3127-S","description":"\u003cp\u003eSM7 Helmet - Core - Gloss Red - Small\n\u003cbr\u003eMulti-layer shell is constructed from a blend of fiberglass, carbon, and aramid fiber from the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability, and durability, Engineered for off-roading racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight, helmet while its supremely aerodynamic composite shell delivers exceptional impact protection, A-Head Fitment and Visor Detaching System, the SM7 is equipped with PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area, Key Features, Aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, The shell's curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider's head from direct force and referred to the neck and spinal column, Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation, The fit can be further customized via the Alpinestars replacement cheek pads, which are available in all thicknesses and are exchangeable between all shell sizes, Communication System Compatible — Cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers, Construction, Linings are removable and washable by hand using warm water and neutral soap, Fabrics have antimicrobial treatments, Crown Pad — Crown pad and neck pad are elastically connected, for better oblique impact management, Top Pad — The top pad is removable and adjustable in height thanks to the A-head system, Cheek Pads — The cheek pads are fitted 3D foam, with an emergency extraction system (ERS), with a channel for hydration tube installation, Cheek pads are interchangeable among all sizes, Chin Strap — Chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings, removable covers for washing purpose, Integrated channels on both sides to accommodate a hydration system, Protection, Visor Detaching System features a release mechanism is conceived to avoid the inherent weaknesses in other anchoring systems, Visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction, PLASMA inside; Alpinestars PLASMA technology is strategically-integrated into the SM7's side pads for high performance shock absorption in a critical area, significantly reducing risk of injuries\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844581826800,"sku":"01109274","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572641.png?v=1781546540"},{"product_id":"alpinestars-sm7-helmet-core-gloss-red-large-8301826-3127-l","title":"ALPINESTARS SM7 Helmet - Core - Gloss Red - Large 8301826-3127-L","description":"\u003cp\u003eSM7 Helmet - Core - Gloss Red - Large\n\u003cbr\u003eMulti-layer shell is constructed from a blend of fiberglass, carbon, and aramid fiber from the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability, and durability, Engineered for off-roading racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight, helmet while its supremely aerodynamic composite shell delivers exceptional impact protection, A-Head Fitment and Visor Detaching System, the SM7 is equipped with PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area, Key Features, Aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, The shell's curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider's head from direct force and referred to the neck and spinal column, Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation, The fit can be further customized via the Alpinestars replacement cheek pads, which are available in all thicknesses and are exchangeable between all shell sizes, Communication System Compatible — Cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers, Construction, Linings are removable and washable by hand using warm water and neutral soap, Fabrics have antimicrobial treatments, Crown Pad — Crown pad and neck pad are elastically connected, for better oblique impact management, Top Pad — The top pad is removable and adjustable in height thanks to the A-head system, Cheek Pads — The cheek pads are fitted 3D foam, with an emergency extraction system (ERS), with a channel for hydration tube installation, Cheek pads are interchangeable among all sizes, Chin Strap — Chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings, removable covers for washing purpose, Integrated channels on both sides to accommodate a hydration system, Protection, Visor Detaching System features a release mechanism is conceived to avoid the inherent weaknesses in other anchoring systems, Visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction, PLASMA inside; Alpinestars PLASMA technology is strategically-integrated into the SM7's side pads for high performance shock absorption in a critical area, significantly reducing risk of injuries\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844582580464,"sku":"01109276","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572656.png?v=1781546544"},{"product_id":"alpinestars-sm7-helmet-core-matte-orange-blue-small-8301826-408-s","title":"ALPINESTARS SM7 Helmet - Core - Matte Orange\/Blue - Small 8301826-408-S","description":"\u003cp\u003eSM7 Helmet - Core - Matte Orange\/Blue - Small\n\u003cbr\u003eMulti-layer shell is constructed from a blend of fiberglass, carbon, and aramid fiber from the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability, and durability, Engineered for off-roading racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight, helmet while its supremely aerodynamic composite shell delivers exceptional impact protection, A-Head Fitment and Visor Detaching System, the SM7 is equipped with PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area, Key Features, Aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction, The shell's curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider's head from direct force and referred to the neck and spinal column, Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation, The fit can be further customized via the Alpinestars replacement cheek pads, which are available in all thicknesses and are exchangeable between all shell sizes, Communication System Compatible — Cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers, Construction, Linings are removable and washable by hand using warm water and neutral soap, Fabrics have antimicrobial treatments, Crown Pad — Crown pad and neck pad are elastically connected, for better oblique impact management, Top Pad — The top pad is removable and adjustable in height thanks to the A-head system, Cheek Pads — The cheek pads are fitted 3D foam, with an emergency extraction system (ERS), with a channel for hydration tube installation, Cheek pads are interchangeable among all sizes, Chin Strap — Chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings, removable covers for washing purpose, Integrated channels on both sides to accommodate a hydration system, Protection, Visor Detaching System features a release mechanism is conceived to avoid the inherent weaknesses in other anchoring systems, Visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction, PLASMA inside; Alpinestars PLASMA technology is strategically-integrated into the SM7's side pads for high performance shock absorption in a critical area, significantly reducing risk of injuries\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49844583366896,"sku":"01109280","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/1980\/5424\/files\/5572686.png?v=1781546549"}],"url":"https:\/\/sublimepowersports.com\/collections\/alpinestars.oembed?page=97","provider":"Sublime Powersports","version":"1.0","type":"link"}