Electrical

EZ-Install Harnesses prevent cutting or splicing of your stock wiring harness in order to use additional turn signals or accent lights Plug our harness in between the stock front turn signal connections Plug and play. HARNESS TURNSIGNAL TAP

EZ-Install Harnesses prevent cutting or splicing of your stock wiring harness in order to use additional turn signals or accent lights Plug our harness in between the stock front turn signal connections Plug and play. HARNESS TURNSIGNAL TAP

EZ-Install Harnesses prevent cutting or splicing of your stock wiring harness in order to use additional turn signals or accent lights Plug our harness in between the stock front turn signal connections Plug and play. HARNESS TURNSIGNAL TAP

Refill your Deutsch Builder Kits with these connector components Each connector features a silicon rubber seal to reduce corrosion and moisture The same connectors, receptacles and plugs used on factory wiring harnesses Can also be used for replacement...

Allows riders to install taller bars, taller risers or relocate their speedometers Color matching wire, OEM connectors and covered with PVC extruded tubing for a ôfinishedö look Easy to install Plug and play Made in U.S.A.. HARNESS SPEEDOMETER EXT IND...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be...

Kit includes 17' of 8-gauge red power wire, 3' and 15' RCA cables, 3' of 8-gauge black ground wire, 17' of 18-gauge blue remote wire and 17' of 16-gauge speaker wire Also includes AGU-style heat-resistant fuse holder, 50-amp AGU fuse and 6' of split loom...

All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches Harnesses include both male and female Molex terminals crimped on each end Kit includes wire heat shrink and color-matching wire Made in the U.S.A.. WIRE KIT...

Allows plug-n-play installation of additional lighting to the rear of the motorcycle without cutting or splicing the factory wiring Plug and play. HARNESS REAR FENDER

Made in the U.S.A. Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.. HARNESS RR SPKR W/CONN

All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches Harnesses include both male and female Molex terminals crimped on each end Kit includes wire heat shrink and color-matching wire Made in the U.S.A.. WIRE KIT...

Thin wall, single-conductor automotive grade hook up wire covered in cross-linked polyethylene (XLPE) insulation Rated for a temperature range of -40?C to 125?C Meets SAE-J1128 & MS-8900 specifications. WIRE 10-GAUGE GXL PRIMARY 25' WHITE