Engine

Bolt-on cylinder set Bored slightly under nominal size and are not honed Made in the U.S.A.. CYLINDERS 4.25"M8 BLK

Bolt-on cylinder set Bored slightly under nominal size and are not honed Made in the U.S.A.. CYLINDERS 4.25"M8 BLK HL

Bolt-in cam for 103ö Twin Cam motors Use with stock heads and low restriction intake and exhaust Broad torque curve improves output over stock over the entire RPM range Made in the U.S.A.. CAMS MR103GD 99-06

Great overall cam for Softail and Dyna Provides strong low-end torque and horsepower Strongest from 1500-5000 rpm. CAMS 583GEAR 99-06

Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9 More power across the rpm range, with improved low and midrange torque Can be used with stock pushrods, springs and lifters Strongest from 1,000-4,000 rpm Made in the U...

Bolt-in cams for 88 CID engines with stock compression ration Great low and mid-range torque Lower lift allows them to be bolted into stock 96ö-106ö (EU: 2,44 m - 2,69 m) '06 engines with stock valve springs Strongest from 1000-4500 RPM 180 psi (EU:...

Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9 More power across the rpm range, with improved low and midrange torque Can be used with stock pushrods, springs and lifters Strongest from 1,000-4,000 rpm Made in the U...

Original equipment specifications Bolt-in cam with stock cam timing Does not require tuning Made in the U.S.A.. CAMS 475GEAR 99-06TC

For 95/96/103/110 cubic-inch engines Compression ratios from 10.5:1 to 11.5:1 Strongest from 3000-6000 rpm High-lift springs and adjustable pushrods required. CAMS W/GEARS 640G 07-17TC

Strongest from 3000-6000 rpm High-lift springs and adjustable pushrods required. CAMS W/GEARS 625G 07-17TC

Strongest from 3500-6000 rpm. CAMS W/GEARS 585G 07-17TC

570G/570C chain drive cams are for 88/96/103 cubic-inch engines with compression ratios between 9:1 and 10:1 Strongest from 3200-3700 rpm. CAMS W/GEARS 570G 07-17TC