Engine

Kits includes oil pump, standard or universal cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with O-rings, breather...

Bolt-in, legal performance No need for expensive dyno tuning Display vehicle data channels in real-time Weather-resistant for use in all conditions High contrast display, viewable in direct sunlight Kit includes 475 cam and Dynojet PV-3 tuner. CAMSHAFT...

S&S Cams are tested on the dyno, street and track before being offered to the public With hundreds of hours of testing on each cam, you know you are getting the best cam S&S can produce Bolt in cam for '00-'17 models only Best performance gains 3500-6500...

Oil Pump for M8 models. OIL PUMP M8 O/C

Bolt-in cam for 103ö Twin Cam motors Use with stock heads and low restriction intake and exhaust Broad torque curve improves output over stock over the entire RPM range Made in the U.S.A.. CAMS W/IN GRS MR103 99-06

S&S Cams are tested on the dyno, street and track before being offered to the public With hundreds of hours of testing on each cam, you know you are getting the best cam S&S can produce Bolt in cam for '00-'17 models only Best performance gains 3500-6500...

Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with...

High-quality, heavy duty rod sets come complete and ready to install Set includes front and rear rods, crankpin and nuts, steel cages and roller bearings Rods are deep-forged and heat-treated, 0.120" wider than stock in the I-beam section and feature...

Piston kit includes forged pistons, rings, wrist pin and clips for a complete motor Deck height is 1.207" Made in the U.S.A. This kit is not compatible with XR1200 or '21 Sportster S/RH1250S models.. PISTONS XL1250 10.3:1 STD

Oil Pump for M8 models. OIL PUMP M8 W/C

Required for S&S 106" stock bore stroker kit with 4-1/2" stroke flywheels Compatible with stock or S&S Super Stock« cylinder heads Piston kit includes forged pistons, rings, wrist pins and clips for a complete motor Made in the U.S.A.. STANDARD PISTONS...

Piston kit includes forged pistons (unless noted) rings, wrist pins and clips for a complete motor replacement Made in the U.S.A. 3 7/8"T.C. PISTONS +.005"