Engine

Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9 More power across the rpm range, with improved low and midrange torque Can be used with stock pushrods, springs and lifters Strongest from 1,000-4,000 rpm Made in the U...

Strongest from 3000-6000 rpm High-lift springs and adjustable pushrods required. CAMS CHN DR 625C 07-17TC

Cams designed as bolt-in cam for 88", 95", 96" and 103" engines with compression ratios below 9.7:1 Strongest from 3000-5000 RPM Stock pushrods and valve springs are acceptable Made in the U.S.A.. CAMS CHN DR 510C 07-17TC

Rollers have a larger-than-stock inner bearing race that reduces stress and increases axle life Each lifter body and plunger assembly is hand-fit and pressure-tested to ensure correct operation Redesigned plunger assembly withstands forces associated...

Precision machined from billet aluminum Blue anodized finish Passage plugs are removeable for servicing Made in U.S.A.. CAMPLATE M8

Unique S&S design dual-spring kit reduces the risk of valve float For valve lift with 1.800" (EU: 4,57 cm) /130 lb. (EU: 58,97 kg) installed height, 325 lb. (EU: 147,42 kg) at max lift Includes springs, top and bottom collars, keeper shims and valve...

Fit most generator motors; styled after the OEM types below Cast construction with a natural finish Include gasket and mounting hardware Made in the U.S.A.. COVER CAM 48STYLE NAT.

Rollers have a larger-than-stock inner bearing race that reduces stress and increases axle life Each lifter body and plunger assembly is hand-fit and pressure-tested to ensure correct operation Redesigned plunger assembly withstands forces associated...

An economical solution for stock rebuilds, and mild performance upgrades Forged from 8620 steel for greater strength than stock or cast steel Feature the same .750" long rocker shaft bushings as S&S Roller Rockers: longer bushing provides 50% more load...

A four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware Due to the inherent characteristics of gear drives, you may...

Features revolutionary design - allows quicker, easier installation without the removal of the rocker covers .4375ö diameter Chromoly steel Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply slides into the...

Kit includes four S&S Quickee pushrods, four pushrod covers and O-rings Pushrods are manufactured from chromoly steel for superior strength Pushrod covers have a chrome-plated finish Kit does not require rocker box removal Made in the U.S.A.. PUSHROD KT...