Fuel & Air

Connect to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required Allow user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Designed to withstand heat, dirt and moisture Allows for wide-open throttle during launch Interfaces to a coil pack Comes with a harness No torque limitations True two-step. LNCH CNTRL KT RZR PROR 22

Dynojet Launch Control Kit With Switch 96070004. LAUNCH CONTROL KIT W/SWITCH TYPE 2 COP POL

Dynojet Launch Control Kit With Switch 96070003. LAUNCH CONTROL KIT W/SWITCH TYPE 1 POL

Dynojet Launch Control Kit With Switch 96070001. LAUNCH CONTROL KIT W/SWITCH C-A X3 17-21

Plugs into the vehicle's diagnostic port and seamlessly integrates AFR data from the included wideband O2 sensor(s) with the OEM databus When used in conjunction with Power Vision CX, you can view and datalog wideband O2 data alongside custom channels...

Designed to withstand heat, dirt and moisture Allows for wide-open throttle during launch Interfaces to a coil pack Comes with a harness No torque limitations True two-step. LNCH CNTRL KT RZR PRO 20-

Designed to withstand heat, dirt and moisture Allows for wide-open throttle during launch Interfaces to a coil pack Comes with a harness No torque limitations True two-step. LAUNCH CNTRL KT X3 17-21

Designed to withstand heat, dirt and moisture Allows for wide-open throttle during launch Interfaces to a coil pack Comes with a harness No torque limitations True two-step. LNCH CNTRL KT RZRXP 16-21

Include Wideband O? and Dual Wideband O? sensors and controllers that connect to the Power Commander V The kits automatically adjust the fuel map while riding Include 18 mm bungs. AUTOTUNE KIT MET FOR PC-V

Dynojet Boost Tube Kit 96030009. BOOST TUBE KIT W/O BOV C-A X3 TURBO 17-21

Pressure table gives you 3D mapping capability based on boost vs RPM, while the temperature table gives you 2D mapping capability with up to 50 points of adjustment Map switch can be mounted to change between two different maps that have been pre-loaded...