Fuel & Air

All Power Vision returns and/or adjustments must be made directly with Dynojet Research Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU High contrast display, viewable in direct sunlight Spark timing optimized for...

Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps Build an adjustment...

Connect to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required Allow user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Connect to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required Allow user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

The "basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately The "basic" mode allows you to have a single fuel table...

Pressure table gives you 3D mapping capability based on boost vs RPM, while the temperature table gives you 2D mapping capability with up to 50 points of adjustment Map switch can be mounted to change between two different maps that have been pre-loaded...

Software is compatible with Power Commander, so you can download Power Commander maps to the unit Plug-n-play fuel management device pre-programmed with make/model specific maps Fully adjustable computer compatibility for ultimate tuning and...

The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors Once the sensor is attached you will have full Quick Shifter functionality The QEM connects to the upper injectors and then into the PCV...

The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors Once the sensor is attached you will have full Quick Shifter functionality The QEM connects to the upper injectors and then into the PCV...

Maintain higher boost targets while enjoying optimized performance DynojetÆs Wastegate Kit gives you better control than a factory wastegate with a stock or aftermarket turbo Optimizing performance while jettisoning unnecessary exhaust gases. WASTEGATE...

The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors Once the sensor is attached you will have full Quick Shifter functionality The QEM connects to the upper injectors and then into the PCV...

Dynojet J Tube Kit 96030011. J TUBE KIT POL RZR XP TURBO 16-21