Handlebars

Grip angle is forward and upward from conventional ape hangers 1-1/4" diameter formed handlebars with 1" center mounting section and 1" grip mounts Diamond knurled for non-slip clamping with risers on 3-1/2" centers Dimpled and drilled for late model...

Made of 14-gauge steel tubing Feature a 1-1/4" diameter clamping area; require special risers and top clamp to mount Notched for electronic throttle control Slotted and milled for internal wiring Made in the U.S.A.. HANDLEBAR 14X1.25 APE CH

Made of 14-gauge steel tubing Feature a 1-1/4" diameter clamping area; require special risers and top clamp to mount Notched for electronic throttle control Slotted and milled for internal wiring Made in the U.S.A.. HANDLEBAR 12X1.25 APE CH

Made of 14-gauge steel tubing Feature a 1-1/4" diameter clamping area; require special risers and top clamp to mount Notched for electronic throttle control Slotted and milled for internal wiring Made in the U.S.A.. HANDLEBAR 10X1.25 APE CH

Pre-drilled for internal wiring and notched for electronic throttle control Knurled 3-1/2" on-center to prevent slippage Clamping width is 5.5" to accommodate one-piece top riser clamps Works with standard controls and grips Made in the U.S.A.. HANDLEBAR...

Pre-drilled for internal wiring; notched for electronic throttle control 3-1/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps Compatible with standard '96-'16 style controls and grips Made in the U.S.A.. H/BAR FAT...

Pre-drilled for internal wiring; notched for electronic throttle control 3-1/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps Compatible with standard '96-'16 style controls and grips Made in the U.S.A.. HANDLEBAR...

Pre-drilled for internal wiring; notched for electronic throttle control 3-1/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps Compatible with standard '96-'16 style controls and grips Made in the U.S.A.. H/BAR FAT...

Pre-drilled for internal wiring; notched for electronic throttle control 3-1/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps Compatible with standard '96-'16 style controls and grips Made in the U.S.A.. HANDLEBAR...

Designed to keep hands in correct position for batwing fairing baggers Dimpled and drilled Diamond knurled for grip and notched for electronic throttle control Eclipse features a proprietary, black chrome electroplated finish Made in the U.S.A....

14-gauge steel tubing Diamond knurled for OEM risers to prevent slippage Drilled and dimpled +2 provides 2-7/16" additional pullback at the same height and width as factory 2+2 provides the same additional pullback and adds 2-1/16" in height Made in the...

14-gauge steel tubing Made in the U.S.A.. HANDLEBAR 1" X12 APE BK