Lighting & Instrument

Designed to replace the run/brake/turn functions on Non-CVO '10-'13 FLHX/FLTRX after the rear fender is replaced or the bottom fender tip is removed Features 10 brake strobe functions programmable by a switch The pigtail design has a Molex SS6 connector...

Flexible, low-profile auxiliary LED strips designed to mount under the rear fender edge. 78 dual intensity red LEDs per strip are placed at a 90? angle to shine towards the rear Each strip is 25ö long with 5 ft. wire leads to route under the seat for...

Allows visual communication with other riders Three-position waterproof toggle for selecting green, yellow or flashing yellow indicators LED indicators show when riders are approaching, when another rider needs assistance and when you're the last rider...

Super bright white LED light bars come pre-taped with durable 3MÖ double sided tape to mount along the inside of your saddlebags and/or tour pak Each light bar shines 18 white LEDs providing superior illumination with a convenient built in on/off button...

Add decorative visibility to the rear of your tour pak with the addition of our High Mount Tour-Pak LED Light Thirty-two 50/50 LEDs for run and brake with 16 LEDs per side for red turn signal on most models Unit comes pre-taped to adhere to the top of...

Add decorative visibility to the rear of your tour pak with the addition of our High Mount Tour-Pak LED Light Thirty-two 50/50 LEDs for run and brake with 16 LEDs per side for red turn signal on most models Unit comes pre-taped to adhere to the top of...

Add decorative visibility to the rear of your tour pak with the addition of our High Mount Tour-Pak LED Light Thirty-two 50/50 LEDs for run and brake with 16 LEDs per side for red turn signal on most models Unit comes pre-taped to adhere to the top of...

Add decorative visibility to the rear of your tour pak with the addition of our High Mount Tour-Pak LED Light Thirty-two 50/50 LEDs for run and brake with 16 LEDs per side for red turn signal on most models Unit comes pre-taped to adhere to the top of...

18 LEDs illuminate a bright white running light, then flash as an amber turn signal When the turn signal is activated, the white light remains off to provide a full contrast left and right turn signals Mounts to the vehicle with provided hardware, and...

Add a super bright white running light and eye-catching amber turn signal to the end of your handlebars 360 degrees of illumination- 6 each white & amber LEDs per unit Add safety and visibility to your motorcycle White DRL LEDs are automatically...

48 dual intensity red LED board with plug and play 1157 connector Direct replacement for stock bulb in Harley Davidson Tombstone taillight housing Uses existing lens and bucket while providing super bright running light and brake light illumination...

Has six bright white license plate LEDs and 45 super-bright flush-mount dual-intensity red running/brake LEDs Plate dimensions measure: 7-1/4" L x 4-1/4" W Mounting hardware included. FRAME LP DUAL CHROME