Tools

Removes kick starter clutch gear successfully, without damage to the gear Made in the U.S.A.. M/SHFT CLUTCH GEAR TOOL

Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A.. MAINSHFT BRNG RACE TOOLBT

Once the camshafts are removed from the support plate this tool will remove the bearing from the camshaft Removes bearing straight without binding or slipping Made in the U.S.A.. CAM BRG PULLER TWIN CAM

Use to ream rocker bushings to a factory fit of .0007ö - .0012ö in line with each other This precise line reamer is capable of a 24 finish or better Made in the U.S.A.. RCKR BUSH REMR 66-17 TC

Accurately and safely install the inner balancer bearing mounted in the left engine case All done on a work bench without using an arbor press Designed for early or late Beta« cases Made in the U.S.A.. TOOL INSTL INR BAL BRG

Some wrist pin bushings will require a small amount of ball honing to give specified fit (see H-D manual for specifications). Used to ream wrist pin bushings to the proper inner diameter Can be used with rods in or out of the motor Lead-in taper makes it...

Once the cylinder is filled with compressed air, the technician can easily rotate the tool and compress the top collar of the valve spring exposing the keepers to remove the top collar, valve spring, and sea Simply remove the rocker box covers and rocker...

For use on Milwaukee Eight series engines. TOOL LT MAIN SEAL RMVR 88

Assists engine rebuilder to clear jet of all assembly lubes; verifies psi number the jet switches to "on" and visualizes spray pattern before cases are sealed Helps determine if piston jet is stuck open or stuck closed Does not include piston jet shown...

Removes both the front and rear counter-balancer shaft bearing assembly, from the left engine case Designed for the 96" and 110" Beta« engines Made in the U.S.A.. TOOL BAL SHAFT 07-08 ST

Safely installs new main transmission case bearing; does not remove bearing Holds bearing square to its bore, eliminating any marring of bearing bore Made in the U.S.A.. TOOL MAIN GEAR 07-17 BT

Comes with new valve collar receiver for safer tool usage, and can be clamped in vice Hardened ball bearing style tip at valve head end eliminates damage to valve This tool is necessary for removing or installing valves Made in the U.S.A.. VALVE SPRING...