Electrical

Lightweight single-conductor automotive grade hook-up wire covered in PVC insulation Meets UL 1007 and UL 1569 specifications Rated for a temperature range of -40?C to 105?C Made in the U.S.A.. WIRE 20-GAUGE PRIMARY 100' BLACK

Lightweight single-conductor automotive grade hook-up wire covered in PVC insulation Meets UL 1007 and UL 1569 specifications Rated for a temperature range of -40?C to 105?C Made in the U.S.A.. WIRE 18G 100' BLACK

Easy to use spring-bound wire loom Perfect for harness repairs Easy to use and cut. WOVEN CLOTH SPLIT LOOM 4'

A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness connector and install No crimping necessary Made in the U.S.A.. WIRE EXT TURN SIGNAL +8"

All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches Harnesses include both male and female Molex terminals crimped on each end Kit includes wire heat shrink and color-matching wire Made in the U.S.A.. WIRE KIT...

Heavy walled, adhesive lined heat shrink is perfect when covering splices that you want to keep dry. Works well for battery lugs or aftermarket ignition switch terminals.. HEAT SHRNK ADHESIVE 5/16"

AMP Multi-Lock connectors are direct Harley-Davidson replacements These non-waterproof connectors are used on every factory model Includes all necessary wire seals, wedgelocks and crimp terminals Includes eight 8-position plugs, eight 6-position plugs,...

AMP Multi-Lock connectors are direct Harley-Davidson replacements These non-waterproof connectors are used on every factory model Includes all necessary wire seals, wedgelocks and crimp terminals Includes eight 8-position plugs, eight 6-position plugs,...

Connect directly to the vehicle allowing users to add additional lighting or any electrical items without CAN/Bus interference Made in the U.S.A. POWER TAP PIGTAIL 2-PACK

Allows for easy relocation of speedometer and indicator lights when installing taller risers and using the stock speedo/indicator lamp bracket. 15" long OEM wire colors with male and female terminals installed Rider must de-pin OEM Molex connector for...

Replacement rear fender foam loom with adhesive tape, cut to 18" long This kit will replace the OEM loom for (2) motorcycles. LOOM REAR FENDER 18"

Features all of the wire, heat shrink and Lightning Splice's needed to make adding on additional LED lighting simple Ground, running light, brake light and turn signal wiring for a left and right side light included. HARNESS REAR FENDER