Electrical

Recommended for electrical connection for all UltraCool Oil Coolers. 6 PIN ACCESS PLUG CONNECT

LED Light Clamp with 9/64" Allen Cap Screw and 5/64" Allen Set Screw Indicate when the oil cooler fans are operating. HANDLEBAR 1" LED CMP BKCH

Trail Tech stators replace the OEM stator Trail Tech stators increase power output significantly All Trail Tech stators are custom made by Trail Tech, not purchased from bike manufacturers and rewound Because Trail Tech manufactures stators from scratch,...

Provides over 100W of DC power at idle Model-specific connectors Not for use with OEM regulator/rectifier Stock battery may be used if present. KIT STATOR KTM/HUS

Trail Tech stators replace the OEM stator Trail Tech stators increase power output significantly All Trail Tech stators are custom made by Trail Tech, not purchased from bike manufacturers and rewound Because Trail Tech manufactures stators from scratch,...

12V, 3700 mAh rechargeable NiMH (Nickel-Metal Hydride) battery for connection to a non-electric start vehicle 12V DC electrical system 3.75" x 1.5" x 3" (EU: 9,52 cm x 3,81 cm x 7,62 cm) ; 20 oz. (EU: 567 g). BATTERY NIMH 12V 3700MAH

For DC electrical single-phase systems Bare wire application Can be used with any DC Trail Tech system with a lighting coil Allows for automatically turning off the lights with adjustable delay For Trail Tech systems only.. REG/REC FULL WAVE

3-positions (High, Low, Off) for the light switch Bar mounted Dual function- light control switch and kill switch. SWITCH 3 POSITION W/KILL

OE Replacement. REGULATOR UNIV AC

Billet 6061 T-6 aluminum housing and 7' trim-to-fit wiring design is compact and easily hidden on custom motorcycles Perform all fuse, relay (includes starter relay) and signal-canceling functions in one simple package Provide multiple flasher...

Designed for use in custom applications where a Twin Cam motor and crank sensor are used Complete ignition system includes module, coil, wires, Smart Link software, communication cable and instructions (no Harley factory harness required) Consolidates...

Compact design makes it easy to hide on a custom motorcycle Performs all fuse, relay and signal-canceling functions in one simple package Allows a dual-filament bulb to be used in three ways: tail, brake and turn signal (excluding the need for a center...