Electrical

Thin wall, single-conductor automotive grade hook up wire covered in cross-linked polyethylene (XLPE) insulation Rated for a temperature range of -40?C to 125?C Meets SAE-J1128 & MS-8900 specifications. WIRE 12-GAUGE GXL PRIMARY 25' RED

Thin wall, single-conductor automotive grade hook up wire covered in cross-linked polyethylene (XLPE) insulation Rated for a temperature range of -40?C to 125?C Meets SAE-J1128 & MS-8900 specifications. WIRE 12-GAUGE GXL PRIMARY 25' BROWN

Thin wall, single-conductor automotive grade hook up wire covered in cross-linked polyethylene (XLPE) insulation Rated for a temperature range of -40?C to 125?C Meets SAE-J1128 & MS-8900 specifications. WIRE 12-GAUGE GXL PRIMARY 25' BLACK

Same configuration as the Deutsch DT series, but on a smaller scale Can be used for replacement in OEM applications Made in the U.S.A.. PIN SCKT 100PK 74191-98

Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars Color coded to connect to the existing Molex connector; simply plug and play (except models with hardwired...

Allows for easy relocation of speedo/tach cluster when using tall risers. HARNESS INSTMNT EXT 15"

22-16 gauge Made in the U.S.A.. TERMINAL CAP 1/4" HD9905

Kit includes four each of the AMP and Delphi connectors Connectors include terminal ends and wire seals Made in the U.S.A.. CONN DELPHI 72244-95 5-PK

Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars Color coded to connect to the existing Molex connector; simply plug and play (except models with hardwired...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be...

36" extensions allow relocation of handlebar switch-mounted turn signals on models with CAN Bus electrical systems After cutting and disconnecting the wires at the switch housings, extensions are soldered in; OEM-style plugs connect into the two...