Electrical

1.6kW output allows easy starting with stock battery cables Produces more cranking power for big-inch Twin Cam engines OEM size for easy installation, even on Softails Starter clears oil filler on Dynas and Touring models 11-tooth drive gear for faster...

Kit includes stator, rotor and a black series-type regulator Series-type regulator reduces load on stator and decreases engine drag Not for fuel-injected models.. CHARGE SYS 99-03 TC CARB

Provide 25A at idle and 40A continuously above 2800 rpm Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications...

Provide 25A at idle and 40A continuously above 2800 rpm Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications...

Provide 25A at idle and 40A continuously above 2800 rpm Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications...

Provide 25A at idle and 40A continuously above 2800 rpm Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications...

Provide 25A at idle and 40A continuously above 2800 rpm Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications...

Permanent Magnet Gear Reduction (PMGR) Prestolite-style starter Mates to OEM starter gear case and output shaft Produces 1.6kW of cranking energy by using a modern permanent magnet field Lower planetary gear reduction ratio of 6:1 Standard machined...

Replacement regulator for Compu-Fire charging kits, part #s 2112-0098, 2112-0152 and 2112-0153. REGULATOR VLTG F/CMPFRE

New generation series regulators reduce load on stator and decrease engine drag When not charging, regulator goes to an open circuit, so there is no load on the stator or rotor Wire harness included Made in the U.S.A.. REPL.40AMP REGULATOR

Features a 10-tooth pinion gear and an 84-tooth starter ring gear that produces 15% more starting torque than stock (9:66 ratio) gears Gears are made of 8620 carbonized steel for strength and long life Uses OEM clutch baskets Reduces gear tooth breakage...

Replacement stator for Compu-Fire charging kits, part #s 2112-0098, 2112-0152 and 2112-0153. STATOR 40A 3 PHASE TC