Engine

Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with...

Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with O-rings, miscellaneous hose...

Forged pistons for superior strength Modern alloys and piston skirt profiles for low noise and long engine life Includes set of pistons, rings, wristpins, and clips. PISTONS 3.625HC SHVL.020

For 80" stock big twin motors Forged pistons for superior strength Piston kits include set of pistons, rings, wristpins, and clips Wrist pin deck height 1.270" Made in the U.S.A. Require the use of connecting rods with a rod length of 7.440"(standard...

For 80" stock big twin motors Forged pistons for superior strength Piston kits include set of pistons, rings, wristpins, and clips Wrist pin deck height 1.270" Made in the U.S.A. Require the use of connecting rods with a rod length of 7.440"(standard...

Bolt-in cam for 103ö Twin Cam motors Use with stock heads and low restriction intake and exhaust Broad torque curve improves output over stock over the entire RPM range Made in the U.S.A.. CAMS MR103C 07-17TC

Bolt-in cams for 88 CID engines with stock compression ration Great low and mid-range torque Lower lift allows them to be bolted into stock 96ö-106ö (EU: 2,44 m - 2,69 m) '06 engines with stock valve springs Strongest from 1000-4500 RPM 180 psi (EU:...

Strongest from 3500-6000 rpm. CAM 585CHN 99-06

Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9 More power across the rpm range, with improved low and midrange torque Can be used with stock pushrods, springs and lifters Strongest from 1,000-4,000 rpm Made in the U...

Strongest from 3500-6000 rpm. CAMS CHN DR 585C 07-17TC

570G/570C chain drive cams are for 88/96/103 cubic-inch engines with compression ratios between 9:1 and 10:1 Strongest from 3200-3700 rpm. CAMS CHN DR 570C 07-17TC

Cams designed as bolt-in cam for 88", 95", 96" and 103" engines with compression ratios below 9.7:1 Strongest from 3000-5000 RPM Stock pushrods and valve springs are acceptable Made in the U.S.A.. CAMS 510C CHN DR 99-06TC