Fuel & Air

All Power Vision returns and/or adjustments must be made directly with Dynojet Research Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU High contrast display, viewable in direct sunlight Spark timing optimized for...

All Power Vision returns and/or adjustments must be made directly with Dynojet Research Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU High contrast display, viewable in direct sunlight Spark timing optimized for...

Pressure table gives you 3D mapping capability based on boost vs RPM, while the temperature table gives you 2D mapping capability with up to 50 points of adjustment Map switch can be mounted to change between two different maps that have been pre-loaded...

Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps Build an adjustment...

Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps Build an adjustment...

Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected "Warm up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading) Can add...

Connect to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required Allow user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Software is compatible with Power Commander, so you can download Power Commander maps to the unit Plug-n-play fuel management device pre-programmed with make/model specific maps Fully adjustable computer compatibility for ultimate tuning and...

Software is compatible with Power Commander, so you can download Power Commander maps to the unit Plug-n-play fuel management device pre-programmed with make/model specific maps Fully adjustable computer compatibility for ultimate tuning and...

Users can literally select between a Power Commander FC Map, custom-built maps, or even fine-tune low, mid or high rpm ranges while sitting on the bike and without plugging into a computer Standard +/- 10% increments from selected map settings; different...

Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps Build an adjustment...

The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors Once the sensor is attached you will have full Quick Shifter functionality The QEM connects to the upper injectors and then into the PCV...