JIMS

Perform like a hydraulic tappet up to 5500 rpm, then turn into a solid tappet When they turn into solid tappets, it adds approximately three to six more usable horsepower Prevent hydraulic pump at...

Perform like a hydraulic tappet up to 5500 rpm, then turn into a solid tappet When they turn into solid tappets, it adds approximately three to six more usable horsepower Prevent hydraulic pump at...

Includes shaft and bushing Made in the U.S.A.. SHAFT IDLER W/BUSHG 36-69

Slip the dog bone end of tool into the bottom side of connector until it is touching the back end of connector box Then gently pull out the male wiring connector and tool Safely removes ignition...

Locates on ignition switch face nut that holds switch in place to remove or install switch without damage 3/8" drive access hole Made in the U.S.A.. TOOL IGN LOCK 06-17 FXD

Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of the ignition switch housing Align ignition switch...

Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of the ignition switch housing Align ignition switch...

Works on all ignition systems, including distributorless ignitions Supplies a quick, easy visual check of ignition system Made in the U.S.A.. TOOL SPARK TESTER

Use to install inner cam bearings Made in the U.S.A.. CAM BEARING TOOL 58-99 BT

Use to install inner cam bearings Made in the U.S.A.. CAM BEARING TOOL 57-90 XL

Easily presses the inner cam bearing smoothly into the right case with the cases assembled to the proper depth Made in the U.S.A.. CAM BEARING INSTALR

Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with instructions Made in the U.S.A.. INNER CAM BEARING TOOL