Tools

Designed for use with JAE, JST and Delphi terminals Perfect for small 30 to 20-gauge terminals. TOOL CRIMP MINI U BARREL

Reversible ratcheting wrench used to install and remove 36 mm axle nuts Low profile wheel allows access to the nut without removal of the exhaust 1/2"- square drive hole allows a torque wrench to be used when tightening Double-hexagon flank drive wheel...

Tool troubleshoots cylinder leakdown issues such as valve seat issues, bad rings and bad head gasket Hose assembly has both 14 mm and 18 mm spark plug threads Includes 12 mm and 10 mm adapter Made in the U.S.A.. TOOL CYL LEAKDOWN 4 STRK

Used to install fork tube caps without removing the fork legs from the bike Made in the U.S.A.. TOOL FORK CAP INSTALL49MM

Installs lower leg 49 mm fork seals squarely into the bore without damaging the seal lip surface Designed for specific Harley-Davidson« models except inverted fork models Two-piece design to aid in some assembly applications Also installs dust shield...

Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs inner primary bearing and seal that transmission mainshaft passes through Made in the U.S.A.. TOOL...

Useful when installing the second cylinder over the piston and rings after the first cylinder has been installed One end fits Twin Cam models, while the other end works with Milwaukee Eight« engines Keep the cylinders in place when the heads are removed...

Kit includes enough pieces for one Twin Cam engine and transmission Plugs holes on engines and transmissions when rebuilding Helps seal out dirt, dust and more Made in the U.S.A.. PLUG KIT ENG/TRAN TWINCAM

Ensures the mainshaft on Harley-Davidson« Sportster models extend through the guidance collar for correct alignment Short socket is specifically designed to remove, install and properly tighten the front final drive sprocket and pulley Provides full...

Quickly and easily removes wrist pins from Milwaukee-Eight« engines Adapter part for JIMS« Wrist Pin Tool (PART# DS-196197) Made in the U.S.A.. TOOL WRIST PIN REM M8

Adapter for Harley-Davidson« Evolution hydraulic tappets Must use with JIMS« Tappet Pump and Test Stand. TOOL ADP TESTR TAPT EVO

Replacement puller plate for Jim's Mainshaft Bearing Race Tool for Big Twin models Made in the U.S.A.. TOOL PULLR PLT DS196056