ANDREWS

Accommodates cam lifts of .550"+ Installation does not require machining of heads Kit includes four inner and four outer springs For use with titanium upper-spring collars Collars sold separately...

Provide correct spring force for any of our performance cams when used in 74" and 80" motors Max lift; installation does not require complicated machining but does require proper valvetrain setup...

More mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with stock valve springs Made in the U.S.A...

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range Designed for hydraulics, but could be run with solids...

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range Designed for hydraulics, but could be run with solids...

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range Designed for hydraulics, but could be run with solids...

Bolt-in cam 107ö-114ö engines Big power; 127 ft lb and 109 hp (from 1200 to 5500 rpm). CAM M462 17-19 M8

Great mid-range torque and power with free-flow exhaust pipes and injector tuning. CAM M464 17-19 M8

Stock Knuckle replacement cam For stock motors and restoring an older classic engine, this is the cam to use Made in the U.S.A.. CAMSHAFT N 36-47 BT

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.. ANDREWS N2 CAM 91-99 XL

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.. ANDREWS N2 CAM 00-19 XL

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods N3 cams are bolt-in for 05-16 883/1200 engines with stock...