Tools

Both the ring compressor and ring expander pliers are featured with ratcheting lock to hold the handles in position for easy piston and ring installation Pliers grip handle works both horizontally and vertically Works with piston diameters 1-3/8" -...

Locking mechanism holds the adjustable jaws in place for one hand use 3 extension bars 10 x (L) 70 mm are attached for extensive applications Knocking to mount position of bearing Jaw range 22 mm - 89 mm. TOOL BEARING RACE/SEAL

Includes 2" and 3" bearing splitters with pulling capacity from 30 mm to 75 mm, bar-type puller head with 175 mm trust bolt 2" bearing splitter 30-50 mm maximum reach up to 170 mm, 3" bearing splitter maximum reach up to 220 mm For removing bearings,...

Precision 72-tooth ratcheting gears need only a 5? swing arc to move fasteners in restricted spaces Provides access and easy engagement of hard-to-reach fasteners and reduces fastener rounding. TOOL FLEXHEAD WRENCH 8PC

Push and pull the locking button at the handle end to lock/unlock the torque setting Accuracy: ?4% tolerance from the set scale value 72 teeth ratchet mechanism. TOOL TORQUE WRENCH 1/2"

Bearing separator features extra thin jaws for entry between triple clamp and bearing Press frame puller system used to remove the lower steering stem bearing Designed to fit multiple fork stem sizes and steering stems. TOOL STEER STEM BEARING

Push and pull the locking button at the handle end to lock/unlock the torque setting Accuracy: ?4% tolerance from the set scale value 72 teeth ratchet mechanism. TOOL TORQUE WRENCH 3/8"

Push and pull the locking button at the handle end to lock/unlock the torque setting Accuracy: ?4% tolerance from the set scale value 72 teeth ratchet mechanism. TOOL TORQUE WRENCH 1/4"

Contains 171 piece heat-shrink tubing set, wire terminal tools, and wire stripping pliers. TOOL ELECTRICAL MAINT SET

Kit includes 2 and 3 way yoke, 125 mm forcing screw, live tip, 3pc M6 x M1.0 x(L) 20 mm bolts, 3pc M6 x M1.0 x (L) 45 mm bolts, 3pc M8 x P1.25 x (L) 45 mm bolts, 3pc M8 x P1.25 x (L) 100 mm bolts, 3pc 3/8öx 16t UNC x (L) 125 mm bolts Pulling system for...

Kit includes 4-piece handy pick and hook set, 2-piece seal pick set, and a 4-piece O-ring and seal installer set Designed for maintenance repair of O-rings and seals. TOOL O-RING & SEAL SET

Changes to use riveting function by detaching the press plate Suitable for most 50 series chains and o-ring chains Provides the ability to quickly assemble the chain Rivet the hollow pin on the chain effortlessly Easily press the side plates onto the...