Tools

Replacement hooks for Rebuild Kit (PART# 0706-0223) Made in the U.S.A.. TOOL REPLACMNT HOOK 2/2PK

T-handle spring puller provides a secure, comfortable grip for maximum leverage Allows mechanics to remove exhaust springs in seconds. FMF SPRING PULLER

Includes air regulator, 0 - 100 PSI pressure gauge, plugs for water and oil cooled oil pumps, gasket and needed hardware Only fits FeulingÖ oil pumps, will not work with factory Harley-Davidson oil pumps The spring tension can be adjusted to achieve the...

Bench test cam plate before installation, cycle the pressure relief valve, testing operation and assuring the valve moves freely, seats and seals each time, any leakage at the relief valve will reduce oil pressure This tool allows the engine builder to...

Feuling« recommends a lifter to lifter bore clearance of 0.001" - 0.0015" for optimum lifter performance Designed to accurately measure lifter bore diameter and bore roundness Includes sizes; 0.8430", 0.8435", 0.8440", and 0.8450" Made in the U.S.A....

Machine valve spring seats for proper installed spring height and spring cup fitment Hardened pilots fit all 3/8" and 1/2" hand drills Cutter bodies and pilots are interchangeable Cutter: Cuts spring seat 0.550" ID x 1.180" OD The M-Eight cylinder head...

Uses single factory engine mount bolt on front and 2 rear engine mount bolts to attach engine to frame Stand also features three holes for bench mounting Fits softail and touring engine cases Made in the U.S.A.. STAND ENGINE MILW8

Use this reamer to perform a valve job on the pressure relief valve seat of any Twin Cam engine cam plate and Milwaukee Eight oil pump psi relief valve bore To use, lightly machine (clean) the cam plate relief valve seat and re-seat the plunger valve Can...

The tool gives quick and accurate readings of the engines crank pinion shaft run out and makes for a great display to show and explain to customers the condition of their crankshaft The tool mounts to the cam chest side of the engine case using the...

The tool mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumb screws and the case cam cover bolt holes The tool gives quick and accurate readings of the engines crank pinion shaft...

Machine valve spring seats for proper installed spring height and spring cup fitment Cutter bodies and pilots are interchangeable Hardened pilots fit all 3/8 and hand drills For valve guides with 6 mm valves. TOOL VALVE GUID 6MM 17+M8

For easy removal and installation of pressure relief spring, by-pass valve and roll pin Holds relief spring down and away from roll pin Made in the U.S.A.. TOOL,PRESS RELIEF VALVE