Tools

Adapters can be changed quickly to accommodate a wide range of bearing combinations Fits bearing with 12 mm - 25 mm inner diameter and 32 mm - 47 mm outer diameter Can be used with a hammer or shop press Comes with protective blow-molded case. TOOL...

Hex socket extends only part of the way into the socket to allow the nut to be held flush with the end for easier, hands-free starting Deep sockets allow nuts to be driven over long threaded bolts Slim outside diameter allows sockets to fit in tight...

Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw 8 mm, 9 mm, and 10 mm lock nut sockets; and 3 mm square, 4 mm square, and straight slot type drivers included Allows...

6 piece spoke wrench set includes convenient storage pouch Unique combination wrench design has 3-sided open end and semi-closed end Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more...

Designed to quickly and precisely remove outer bearing race from the steering head without the use of a hammer and punch Puller design ensures bearing is pulled perfectly straight to eliminate possible damage to frame Works on all tapered bearing races...

Dependable split collet design to remove radial ball bearings. TOOL BEARING REMVR 8PC ST

Complete chain tool for most 520, 525 and 530 standard and O-ring chains Perfect for your tool pack if you have a chain with a rivet master link Will rivet hollow-nose master links (will not rivet solid soft-nose pins) Break, press, and rivet your chain...

One lever has unique combination stepped 12 mm and 10 mm box end wrench on other end for turning rim lock nuts Tire spoon with axle nut hex wrench and tire spoon hex wrench for rim lock nut set 32 mm hex for axle nuts are rated for a maximum torque of 90...

Includes five 1/4" (EU: 0,64 cm) hex drive bits (all 1/2" (EU: 1,27 cm) long) - Straight-slot, Phillips, D-shaped air/fuel mixture screw bit, 6 mm hex jet bit and 1/4"-hex-to-1/4" (EU: 0,64 cm) -drive bit Detent action in handle with matching...

Used for removal of the flywheel or rotor if applicable Laser etched with Motion Pro logo and part number Heat treated for strength and durability Includes M16 x 1.5 crank protector Premium quality high carbon steel Durable hot black oxide finish Right...

High-quality liquid-filled 2.5" dial gauge with protective rubber boot High-pressure hose with dual swivels and brass ball-type air chuck Accurate to plus/minus 1.5% of maximum gauge reading Slight oil seepage is normal. TIRE GAUGE PRO 60PSI STRE

High-quality liquid-filled 2.5" dial gauge with protective rubber boot High-pressure hose with dual swivels and brass ball-type air chuck Accurate to plus/minus 1.5% of maximum gauge reading Slight oil seepage is normal. TIRE GAUGE PRO 30PSI MX