Tools

Improved design and triple prong engagement allows for precise neck bearing adjustment Used to adjust the preload of the neck bearing on Springer forks This is the only tool on the market to do this particular task 1" diameter socket, 3/8" square drive...

Ten punch sizes: 1/4", 5/16", 1/4", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" Designed to cut holes and internal radii in gaskets and other soft material Contains 11 pieces, 10 punches and one long driving mandrel Made in the U.S.A.. GASKET...

Contains 7 metric rethread taps; sizes: M6-1.00, M8-1.25, M-10-1.25, M10-1.50, M12-1.25, M12-1.50 and M12-1.75 Also has 1 metric restorer file in 8 sizes: 0.75", 1.00", 1.25", 1.50", 1.75", 2.00", 2.50" and 3.00" For repair of damaged external threads on...

Features reversible ratcheting action and an 1/4" ball-end Allen bit end for flexibility in tight areas To install and remove intake manifold socket-head cap screws Vinyl handle with ergonomic grip for comfort Made in the U.S.A.. WRENCH INT. MANIFOLD HD

Set consists of one 15? off-set wrench, one 15? reverse off-set wrench, one flat wrench, and four bits (sizes #1 and #2 Phillips, 1/4" and 9/32" slotted) Made in the U.S.A.. WRENCHES FINE TOOTH 7PC

Simply install die onto the damaged or dirty threads, and use a standard wrench to work the die back and forth until the threads are repaired and cleaned Kit includes a set of seven dies (M14-1.50, M16-1.50, M18-1.50, M20-1.60, M24-1.50, 3/4"-16 and...

19 functions and seven ranges (manual) 600V DC, 600V AC, 10A DC, 10A AC with 20 M resistance Continuity buzzer Data hold with an auto power shut-off Fuse protected CAT III 600V ETL approval. MULTIMETER DIGITAL

Extra long rocker box wrench with T40 bit used to remove/replace the bolt that holds the rear fender to the frame on H-D touring models Removes the rear fender bolt without having to remove the tire Made in the U.S.A.. WRENCH REAR FENDER FL

Use with deep well sockets, or 3/8" square drive ratchet Set of 5 includes one of each single-end thread chasers: M10 x 1.0 M12 x 1.25 M14 x 1.25 M18 x 1.5 M20 x 1.5. TOOL THREAD CHASER TAP 5PC. SET

Jaws are adjustable in width and have thin edges that can be forced under and over ends of valve spring to compress it for removal Will reach into small recesses where valve springs and retaining washers are located Long and slender design with maximum...

Specialty nuts are used to hold down cylinder sleeves during service Allow motor to be turned over with heads off. CYLINDER SLEEVE HLD DWN

Remove and install the lock ring on fuel tanks Allows access to the fuel filter and pump. TOOL FUEL TANK LOCK RING