Engine

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Bolt-in cam for street or touring use with more mid-range and upper-end power than the stock 88 EV cams Uses stock springs; works with carbs or fuel injection...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. 74 CAM BH GRIND 78-84

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. 74 CAM BH GRIND 70-77

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range Designed for hydraulics, but could be run with solids Grind #1 is the low-compression version of an "A" grind...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. ANDREWS AB CAM 78-84 BT

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. ANDREWS AB CAM 70-77 BT

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. 74 CAM AB GRIND 48-69 BT

Cam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve guides restricts spring travel (and cam lift) to .430" or less Spring travel and clearance, plus clearance at main bearing boss...

Cam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve guides restricts spring travel (and cam lift) to .430" or less Spring travel and clearance, plus clearance at main bearing boss...

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range Designed for hydraulics, but could be run with solids Grind #1 is the low-compression version of an "A" grind...

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range Designed for hydraulics, but could be run with solids Grind #1 is the low-compression version of an "A" grind...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. 74 CAM J GRND 78-84 SHVL