JIMS

Once the cylinder is filled with compressed air, the technician can easily rotate the tool and compress the top collar of the valve spring exposing the keepers to remove the top collar, valve spring,...

Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire Prevents axle from moving while torquing down the axle nut after setting belt tension Made in the U...

For 7 mm valve guides Harley-Davidson« No. 16461-02 that are used in conjunction with the latest conical (Beehive) valve springs Will also work on equivalent aftermarket 7 mm valve guides Quality...

Includes bearings, retaining rings, spacers, locknuts, gaskets and seals Made in the U.S.A.. 5 SPD. REBUILD KIT 80-E84

Holds 2 halves of spring-loaded balancer scissor gear in alignment before removal Bright color reminds technician to remove it before sealing engine case For use on the Milwaukee EightÖ engine series...

Accurately and safely install the inner balancer bearing mounted in the left engine case All done on a work bench without using an arbor press Designed for early or late Beta« cases Made in the U.S.A...

Installing portion is designed to push on the outer diameter of bearings preventing any damage to the bearing or it's bore Pulls the bearings from the "B" motor case in one easy smooth motion...

Removes both the front and rear counter-balancer shaft bearing assembly, from the left engine case Designed for the 96" and 110" Beta« engines Made in the U.S.A.. TOOL BAL SHAFT 07-08 ST

Micro-finish bore allows a running fit of .0002" Big AxleÖ rollers are designed around three working parts The outer wheel/roller has a 27% greater wall size - less harmonic distortion for better...

Very simple tool, just mount tool in cover, screw in the two removing screws, turn center, and out comes the cam seal The new seal is then pressed in with the same tool, square and flat for a no leak...

Prevents damage to pistons and cylinders when installing new seals and wipers Holds pistons square in their cylinder bores during removal Designed for front and rear 4-piston calipers Made in the U.S...

Use on all bushings These pins hold bushing in place Made in the U.S.A.. STAKING DOWEL PINS OEM275