ANDREWS

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock...

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. ANDREWS EV38 CAM 84-99B-T

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. ANDREW EV46 CAM 84-99 EVD

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float Made in the U.S.A.. ANDREWS EV5 CAM 84-99 B-T

Cams with .600 lift can easily be accommodated when used with high-lift springs Made from T-6 aluminum, collars are lightweight, hard-coated and very strong For 74" and 80" motors Made in the U.S.A....

Accommodates cam lifts of .550"+ Installation does not require machining of heads Kit includes four inner and four outer springs For use with titanium upper-spring collars Collars sold separately...

Provide correct spring force for any of our performance cams when used in 74" and 80" motors Max lift; installation does not require complicated machining but does require proper valvetrain setup...

More mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with stock valve springs Made in the U.S.A...

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range Designed for hydraulics, but could be run with solids...

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range Designed for hydraulics, but could be run with solids...

Similar to the late H-D collars Will provide .060" more spring travel than stock collars Made in the U.S.A.. LOW-PRO LWR COLR 57-85 XL