JIMS

Installs sprocket seal to proper depth Use with JIMS« Driver Handle Holds seal perfectly square Made in the U.S.A.. SPKT SHAFT INSTLR 95-03

Easily aligns and installs starter jackshaft seal without distorting or damaging seal Seal is located in upper part of inner primary of Big Twins Made in the U.S.A.. TOOL STARTER SEAL 94-06

Removes and installs steering head bearing race on 84-16 Big Twin (except 14-16 Dressers), 86-16 XL and 94-02 Buell OEM frames (will also work on most aftermarket frames) Must be used with tool...

Allows installation of delicate, silicone cleveblock bushings in swingarm without damage Tool presses on outer sleeve of bushing Can be used with or without a press. FXR/FLT S/ARM BUSH TOOL

Only when the tip fits nicely with no endplay is the tappet properly adjusted, if the tip doesn?t fit, OR if there is up and down endplay, the tappet is out of adjustment After adjusting the tappet,...

Tappet locations are clearly referenced on the tool, which also serves to protect the tappets from damage when removed from the engine Safely stores anti-rotation pins and tappets for proper and...

Helps diagnose loose or spongy tappets that could eventually lead to bleed-down issues or sticky tappets that won't pump up due to poor hydraulic unit fitment Allows filling of hydraulic tappets...

Made from 52100 bearing material Includes 4340 chromoly axle Made in the U.S.A.. TAPET RLR 29-84 BIG TWIN

Standard solid rollers are designed around three working parts The outer wheel/roller has a 27% greater wall size - less harmonic distortion for better tracking of cam lobe Pin bearings are decreased...

Standard solid rollers are designed around three working parts The outer wheel/roller has a 27% greater wall size - less harmonic distortion for better tracking of cam lobe Pin bearings are decreased...

Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel clearance Will not mar...

Used to remove and install top fork nuts on fork tubes Rubber protector inside socket Will clear most handlebars Made in the U.S.A.. 35MM FORK NUT SOCKET 3/8"